Swivel castor with total lock 3.94 in | Solid rubber, non-marking, Cone ball bearing, With threadguard | 3.94 | Standard | Swivel castor with total lock | Bolt hole, 13 mm

Data sheets

The Agila swivel castor with total lock and bolt hole fitting features a housing made of medium steel sheet and two ball races swivel bearing. The wheel body is made of sheet steel with a solid rubber non-marking tread. The wheel uses a cone ball bearing and has a diameter of 3.94 in. The overall height of the castor is 5.31 in. At a speed of 3 km/h, the castor has a load capacity of 176.37 lb. Under static load conditions, the load capacity is 352.74 lb. The castors can be mounted with standard screws of any length.

Roll performance

Movement noise

Attrition

Corrosion resistance

Article numbers

Article Number

2477DIK100P30-13 TFR

EAN

4031582394450

Core attributes

Type

Swivel castor with total lock

Load capacity at 3 km/h

176.37 lb

Load capacity Static

352.74 lb

Overall height

5.31 in

Temperature range (Maximum)

185 °F

Temperature range (Minimum)

-4 °F

Overall weight

2.24 lb

Product name

Agila

Standard

EN12530 - Devices Castors

Electric conductive

Stainless

Fitting

Hint

Castors can be mounted with standard screws of any length.

Fitting type

Bolt hole

Bolt hole diameter

0.51 in

Housing

Fork shape

Broad

Material

Steel sheet, medium

Swivel bearing

Two ball races

Swivel interference

10.31 in

Offset

1.71 in

Swivel radius

5.16 in

Wheel

Hardness of tread (A)

80 Shore A

Body material

Sheet Steel

Tread material

Solid rubber, non-marking

Tread width

1.26 in

Diameter

3.94 in

Threadguards

With threadguard

Bearing

Cone ball bearing

Handle Set

Hint

Castors can be mounted with standard screws of any length.

Special Features

detail.specialFeatures.subtitle

Non-hazardous materials

Complies with RoHS and REACH regulations. Does not contain polycyclic aromatic hydrocarbons or chromium (VI)

Tested quality

Tested in our own laboratory for compliance with European standards

Solid housing

Made of pressed steel, zinc plated

Prevents unintended movement

Wheel lock for manual operation

Secured stand

Total lock for simultaneously locking the wheel and swivel housing

Variable fitting options

Different fitting dimensions for a wide range of applications

Resource-conserving part replacement

Threaded axles allow effortless wheel change

Low-maintenance wheels

Thread guards for unobstructed operation with minimal cleaning effort

Non-marking movement

Wheels with reduced abrasion and minimal cleaning requirements

Easy steering

Swivel head with double ball bearings

Accessories

Wheel 3.94 in

Puretech

DIK 100x32-Ø8,1

The Puretech caster wheel features a 3.94 in diameter with a 1.26 in wide solid rubber, non-marking tread mounted on a sheet steel body. The wheel incorporates a cone ball bearing system with a 0.31 in axle hole diameter and 1.42 in hub length. Load capacity specifications include a dynamic rating of 176.37 lb at speeds up to 1.86 mph and a static load capacity of 352.74 lb, making it suitable for medium-duty industrial applications requiring smooth, quiet operation with floor protection.

3.94 mm

Light Duty

Details

3.94 mm

Light Duty

Crossselling

Variants

Swivel castor 3.94 in

Agila

2470DIK100P30-13 TFR

The Agila swivel castor has a bolt hole fitting with a housing made of medium steel sheet. It features a two ball race swivel bearing that allows the wheel to rotate 360 degrees. The wheel body is made of sheet steel with a solid rubber non-marking tread. The wheel uses a cone ball bearing and has a diameter of 3.94 inches. The overall height of the castor is 5.31 inches. At a speed of 3 km/h, the castor has a load capacity of 176.37 lb. The static load capacity is 352.74 lb. The castors can be mounted using standard screws of any length through the bolt holes.

3.94 mm

5.31 mm

Light Duty

Details

3.94 mm

5.31 mm

Light Duty