Agila
2471DIK125P50
EAN:
4031582301311
Toote number:
00029446
Kas te ei ole veel leidnud õiget toodet, teil on erinõuded või olete huvitatud üksikutest lahendustest? Võtke meiega ühendust.
Datasheet
Core attributes
| Rakendused | Healthcare Furniture, Industrial Consumer, Medical Institutions, Professional Cleaning Carts, Professional Furniture |
|---|---|
| Toote nimi | Agila |
| Toote tüüp | Swivel castor with directional lock |
| kandevõime 3 km/h juures | 100 KG |
| kandevõimestaatiline | 200 KG |
| Temperatuurivahemik (minimaalne) | -20 °C |
| Temperatuurivahemik (maksimaalne) | 80 °C |
| üldkõrgus | 160 mm |
| Kogulaius | 60 mm |
| Üldine kaal | 1.27 KG |
Jõudlus
| Rulli jõudlus | |
|---|---|
| Liikumismüra | |
| Atraktiivsus | |
| Korrosiooni takistus |
Korpus
| Materjal | Steel sheet, medium |
|---|---|
| kahvel kujundamine | Broad |
| pöördsõlm | Two ball races |
| Värv | Blue passivated |
| offset | 41 mm |
| Pööratav raadius | 131 mm |
| pöörlev ühendus | 262 mm |
| kupli läbimõõt | 60 mm |
Ratas
| Keha materjal | Sheet Steel |
|---|---|
| veerepinna materjal | Solid rubber, non-marking |
| Laagr | Cone ball bearing |
| ratas värv | Blue passivated |
| veerepind | Soft tread |
| ratta läbimõõt | 125 mm |
| veerepinna laius | 32 mm |
| ratas laius | 32 mm |
| veerepind (A) | 80 Shore A |
Paigaldamine
| Paigaldamise tüüp | Rectangular plate |
|---|---|
| Plaadi pikkus | 77 mm |
| Plaadi laius | 67 mm |
| Plaadi augu pikkus (minimaalne) | 46.5 mm |
| Plaadi augu pikkus (maksimaalne) | 51.5 mm |
| Plaadi augu laius (minimaalne) | 56 mm |
| Plaadi augu laius (maksimaalne) | 61.5 mm |
| Plaadi augu läbimõõt | 8.5 mm |
Crossselling
Crossselling
Agila
2470DIK125P50
Swivel castor, housing made of pressed steel, bright zinc plated, blue passivated, double ball bearing swivel head, wheel axle with nut, plate fitting. Wheel centre made of pressed steel, Tread: solid rubber, grey non-marking, with threadguards, cone ball bearing
Agila
2477DIK125P50
Swivel castor with total lock, tail end of castor, housing made of pressed steel, bright zinc plated, blue passivated, double ball bearing swivel head, wheel axle with nut, plate fitting. Wheel centre made of pressed steel, Tread: solid rubber, grey non-marking, with threadguards, cone ball bearing
Agila
2478DIK125P50
Fixed castor, Fork made of pressed steel, bright zinc plated, blue passivated, wheel axle with nut, plate fitting.
Longside of plate 90° off track.
Wheel centre made of pressed steel, Tread: solid rubber, grey non-marking, with threadguards, cone ball bearing
Accessories
Accessories
Puretech
DIK 125x32-Ø8,1
Wheel centre made of pressed steel, Tread: solid rubber, grey non-marking, with threadguards, cone ball bearing