Ruedas
ITP200x50-Ø20 flat
Wheel centre made of Aluminium, Tread: Polyurethane, casted, precision ball bearing
Swivel castor with total lock, tail end of castor, housing made of very heavy pressed steel, reinforced, bright zinc plated, blue passivated, sealed swivel double ball bearing, reinforced and heat-treated ball covers, riveted king pin, dust ring with integrated grease nipple, wheel axle with nut, plate fitting. Wheel centre made of Aluminium, Tread: Polyurethane, casted, precision ball bearing
Resistencia a la rodadura | |
Ruido de movimiento | |
Desgaste | |
Resistencia a la corrosión |
Diámetro de la rueda | 200 mm |
Ancho de la rueda | 50 mm |
Medida de pletina | 137 x 105 mm |
Diámetro de la rueda
200 mm
Ancho de la rueda
50 mm
Medida de pletina
137 x 105 mm
Distancia de agujeros
105 x 80/75 mm
Diámetro de agujero
11 mm
Desplazamiento
55 mm
Interferencia de giro
322 mm
Altura total
240 mm
Capacidad de carga
800 kg
Temperatura
- 10 / + 60 °C
Norma
EN_12532
Peso de la rueda
4 kg
Diámetro de dome
96 mm
Radio giratorio
161 mm
Dureza del bandaje
A 92 Shore
Inoxidable
No
Conductividad eléctrica
No
Soporte
Ruedas giratorias con freno total
Wheel centre made of Aluminium, Tread: Polyurethane, casted, precision ball bearing
Fixed castor, Fork made of heavy pressed steel, reinforced, bright zinc plated, blue passivated, wheel axle with nut, pl...
Swivel castor, housing made of very heavy pressed steel, reinforced, bright zinc plated, blue passivated, sealed swivel ...
Swivel castor with directional lock, housing made of very heavy pressed steel, reinforced, bright zinc plated, blue pass...