- Home
- Castors & Wheels
- Motorised Systems
-
E-Drive Ultimate
E-Drive Ultimate
Power through heavy loads: TENTE E-Drive Ultimate motorised castor delivers powerful assistance, smooth starts, precise steering, and safe braking - easy to integrate and simple to use.
Active filters:
Sort by
Drive Unit 125 mm
E-Drive ultimate
EDUAUFF125P60
The E-Drive ultimate is an electric drive unit for electromobility. It has a rectangular plate fitting and a 125 mm castor with polyamide body and elastic, non-marking, vulcanised tread. Applications include Airport Equipment, Anesthesia Carts, Automotive OEM, C-Arms, CT Scanners, MRI, X-Ray, Ceramic and Glas Manufacturers, Computers on Wheels, Container Construction, Electronic Systems, Clean-Room Technology, Fire Fighting Technology, Fire Protection, Machine Construction, Medication Carts, Nursing Carts, Production and Platfrom Trolleys, Ultrasound, Work Benches and Transport Equipment.
125
mm
125
mm
Frequently Asked Questions
E-drive ultimate is a powered drive system that can be added beneath a trolley as an extra central unit while the application continues to run on four castors. It provides forward and reverse driving assistance and is designed for indoor commercial transport. A robust hardened gear drive, programmable control system, slowdown support and emergency stop make it suitable for applications with higher customisation requirements.
E-drive ultimate adds powered driving assistance to a trolley while the four castors continue to carry and guide the application. Its robust, hardened gear drive supports loads of up to 800 kg in a single set-up and up to 1,600 kg in a twin set-up. The operator can turn the drive switch further for heavier loads and up to the maximum position for maximum driving power, helping reduce manual pushing effort.
Speed on E-drive ultimate is controlled steplessly through the thumbwheel or drive switch on the handle. Turning it forwards or backwards selects the travel direction, while the amount of movement determines the speed. A small movement gives lower-speed assistance, while turning it fully provides the maximum driving power and speed. Returning the control to its centre position stops powered travel. The drive unit has a maximum speed of approximately 4 km/h.
The slowdown function on E-drive ultimate is activated when the operator releases the drive switch towards its neutral centre position. The control system then uses a programmed braking ramp to decelerate the powered movement, helping the operator bring the trolley under control. This function supports controlled slowing, but the drive unit does not provide a mechanical parking brake, so the application may require its own braking solution.
In a single set-up, E-drive ultimate can support the movement of loads up to 800 kg. This is a reference value for the powered drive system and may vary with the floor surface, rolling conditions, castor selection and other environmental factors. The complete trolley should therefore be assessed for its actual operating conditions, including the load ratings of the four castors and the overall application design.
In a twin set-up, E-drive ultimate can support the movement of loads up to 1,600 kg using two drive units. This is a reference value and may vary depending on floor condition, rolling resistance, castor selection and other environmental factors. The overall trolley design and the load ratings of its four castors should also be considered so that the complete application is suitable for the intended operating conditions.
In standby mode, E-drive ultimate is normally in its folded home position, so the drive wheel is lifted clear of the floor and the trolley can be moved on its four castors without drive contact. The System LED goes out while the Battery LED continues to indicate charge level. The control can also enter standby automatically after a configured switch-off time, after an error or when the battery is flat.
Our product range offers 24 V lithium-ion battery options for E-drive ultimate with nominal capacities of 10 Ah and 15 Ah. Both use a plug-and-play connection with the appropriate battery cable and include a key switch to help prevent unauthorised use. Suitable battery holders and chargers are also available. Any alternative battery module should meet the required specifications and be approved for use with the system.
For a trolley with four swivel castors, E-drive ultimate is generally best positioned centrally between the front and rear axles, where it acts as an additional powered unit without replacing the four castors. If the application uses two swivel and two fixed castors, the drive unit is typically positioned between the fixed castors. The final mounting position should also protect the system from damage and suit the trolley structure.
The emergency stop on E-drive ultimate interrupts the supply voltage to the travel motor and the actuator, allowing powered movement to be stopped in an emergency. It should not be treated as a parking brake: when activated, the trolley is not mechanically braked and the normal deceleration function is not applied by default. The application must therefore be prevented from rolling and may need to be stopped or secured manually.
E-drive ultimate is suitable for commercial indoor transport applications where powered assistance can reduce the effort required to move heavier loads, particularly when a trolley needs a central drive unit in addition to its four castors. Its programmable control also supports applications with higher customisation needs. It may be used on suitable indoor transport equipment, provided the floor, load, braking and installation requirements are assessed.
The handle on E-drive ultimate uses separate System and Battery LEDs to show operating information. The System LED indicates states such as initialisation, ready for operation, driving, mandatory break, installation position, faults and emergency-stop status. The Battery LED indicates charge condition, with different colours and flashing patterns, while an acoustic signal can also warn of faults or a flat battery.
E-drive ultimate is designed with a ground-compensation function and can accommodate ground unevenness of up to approximately +/-15 mm. This helps the drive wheel maintain suitable contact pressure as the trolley moves across minor variations in an indoor floor. Actual performance can still depend on the floor condition, load, castor configuration and installation, so larger steps, gradients or severe irregularities should be assessed separately.
E-drive ultimate is specified for operation at ambient temperatures from 5 °C to 40 °C, with relative air humidity up to 90% provided conditions are non-condensing. This range applies to normal indoor commercial use of the drive unit and control components. Storage conditions are different, with a specified storage temperature of -10 °C to 45 °C, so the operating and storage environment should be checked separately.
When cleaning E-drive ultimate, external cleaning is sufficient for the control system. Keep liquids and moisture from entering the components, and remove dirt with a dry cloth or a cloth lightly moistened with a mild soap solution. The operating unit and control module should be cleaned when soiled. Avoid unsuitable cleaning methods or agents that could damage components, seals, cables or electrical connections.