Agila twin
2970DIK075P50
EAN:
4031582302677
Product number:
2970DIK075P50
Haven’t found the right product yet, have special requirements or are you interested in individual solutions? Contact us.
Datasheet
Performance
| Roll performance | Operating behavior well |
|---|---|
| Movement noise | Moving noise very good |
| Attrition | Abrasion resistance well |
| Corrosion resistance | Corrosion resistance well |
| Roll performance | |
|---|---|
| Movement noise | |
| Atrittion | |
| Corrosion resistance |
Housing
| Material | Steel sheet, medium |
|---|---|
| Fork shape | Twin wheel housing |
| Swivel bearing | Two ball races |
| Color | Blue passivated |
| Offset | 31.4 mm |
| Swivel radius | 72.5 mm |
| Swivel Interference | 145 mm |
| Dome diameter | 65 mm |
| Width | 71 mm |
Wheel
| Body material | Sheet Steel |
|---|---|
| Diameter | 75 mm |
| Tread material | Solid rubber, non-marking |
| Bearing | Cone ball bearing |
| Tread | Soft tread |
| Wheel color | Blue passivated |
| Wheel diameter | 75 mm |
| Tread width | 25 mm |
| Wheel width | 25 mm |
| Hardness of tread (A) | 80 Shore A |
Fitting
| Fitting type | Rectangular plate |
|---|---|
| Plate length | 77 mm |
| Plate width | 67 mm |
| Plate hole length (Minimum) | 46.5 mm |
| Plate hole length (Maximum) | 51.5 mm |
| Plate hole width (Minimum) | 56 mm |
| Plate hole width (Maximum) | 61.5 mm |
| Plate hole diameter | 8.5 mm |
Core attributes
| Product name | Agila twin |
|---|---|
| Overall width | 71 mm |
| Product type | Swivel castor |
| Standard | EN12530 - Devices Castors |
| Load capacity at 3 km/h | 100 KG |
| Load capacity Static | 200 KG |
| Temperature range (Minimum) | -20 °C |
| Temperature range (Maximum) | 85 °C |
| Overall height | 102 mm |
| Overall weight | 0.87 KG |
Crossselling
Crossselling
2977DIK075P50
Swivel castor with total lock, tail end of castor, housing made of pressed steel, bright zinc plated, blue passivated, double ball bearing swivel head, wheel axle with nut, plate fitting. Wheel centre made of pressed steel, Tread: solid rubber, grey non-marking, with threadguards, cone ball bearing
