Skip to main content Skip to search Skip to main navigation
Welcome to our newly redesigned website!
The Zeta is a swivel castor with directional lock, designed for demanding material handling duties. The fitting is a medium rectangular plate. The housing is manufactured from very heavy steel sheet and carries a swivel bearing with two ball races, which are either reinforced or stainless. The wheel has a diameter of 200 mm and runs on a precision ball bearing, with a body made of aluminium. The tread is an elastic tyre, non-marking and vulcanised. The overall height of the castor is 240 mm. The static load capacity is 900 kg. The dynamic load capacity is 360 kg at a speed of 6 km/h and 450 kg at a speed of 4 km/h. Its robust construction makes it suitable for continuous operation in demanding environments. Applications include airport equipment, automotive OEM, production and platform trolleys, and transport equipment.
Roll performance
Movement noise
Attrition
Corrosion resistance
Article numbers
Article Number
4681IFP200P63
EAN
4031582366006
S4 Material Number
990837706
Core attributes
Type
Swivel castor with directional lock
Overall width
96 mm
Load capacity at 4 km/h
450 kg
Load capacity at 6 km/h
360 kg
Load capacity Static
900 kg
Overall Height
240 mm
Temperature range (Maximum)
85 °C
Temperature range (Minimum)
-20 °C
Overall weight
3.97 kg
Product Name
Zeta
Standard
EN12532 - Transport Equipment
Electric Conductive
Stainless
Fitting
Fitting type
Medium rectangular plate
Plate hole diameter
11 mm
Plate hole length (Maximum)
80 mm
Plate hole length (Minimum)
75 mm
Plate hole width (Maximum)
105 mm
Plate hole width (Minimum)
75 mm
Plate length
137 mm
Plate width
105 mm
Housing
Housing Color
Blue passivated
Fork shape
Broad, reinforced
Housing Material
Steel sheet, very heavy
Swivel Bearing
Two ball races, reinforced or stainless
Dome diameter
96 mm
Swivel interference
230 mm
Offset
55 mm
Wheel
Hardness of tread (A)
67 Shore A
Body material
Aluminium
Tread Material Mix
Elastic tire, non-marking, vulcanized
Tread width
50 mm
Diameter
200 mm
Body width
50 mm
Threadguards
Without threadguard
Axle
Screwed with nut
Bearing
Precision ball bearing
Wheel Color
Grey / non marking
special-features-image
Special Features
Non-hazardous materials
Complies with RoHS and REACH regulations. Does not contain polycyclic aromatic carbons or chromium (VI).
Tested quality
Tested in our own laboratory for compliance with European standards.
Solid housing
Made of pressed steel, zinc plated.
Resource-conserving part replacement
Threaded axles allow effortless wheel change.
Uninterrupted use
Swivel bearing with dust ring for continuous, uninterrupted movement.
Reliable traction
Traction-optimised treads for secure grip on wet and slippery floors.
Non-marking movement
Wheels with reduced abrasion and little cleaning requirement.
Quiet rolling
Soft wheel versions for a quiet working environment.
Easy steering
Double ball bearing swivel head.
Low-vibration transport
Extra soft wheels with good shock absorbing properties.
Optimised directional lock
Directional lock can be adjusted to your requirements to 2x180° or 4x90°.
Quick maintenance
Swivel bearings lubricated with long-life grease and fitted with grease nipple for easy maintenance.
Extra heavy duty construction
Welded solid steel construction for highest load capacity.
Heavy duty construction
Extra heavy steel housing for high load capacity.
Hardened swivel head
Reinforced and heat-treated ball covers.
Skip product gallery

Accessories

Accessory
Puretech
Ri-Festst. 4681125P63 blau

The Puretech Accessory is a precision-engineered component designed to enhance castor functionality and performance in demanding industrial and commercial applications. Weighing 0.27 kg, this lightweight accessory offers an optimal balance between durability and ease of installation, making it suitable for integration into existing castor systems without adding significant load to the overall assembly. The product is manufactured to exacting standards to ensure reliable operation across a wide range of environmental conditions and usage scenarios. Its compact design facilitates straightforward mounting procedures whilst maintaining compatibility with standard castor configurations. The Puretech Accessory represents a cost-effective solution for operators seeking to improve castor efficiency and extend equipment service life through supplementary component integration.

Skip product gallery

Matching Products

Variants
Swivel castor with total lock 200 mm
Swivel castor with total lock 200 mm
Zeta
4687IFP200P63

The Zeta is a swivel castor with total lock, designed for demanding material handling environments including airport equipment, automotive OEM applications, production and platform trolleys, and transport equipment. The fitting is a medium rectangular plate, providing a secure and standardised mounting interface for attachment to the equipment chassis. The housing is manufactured from very heavy steel sheet and incorporates a swivel bearing with two ball races, which may be reinforced or stainless, ensuring smooth rotation and long-term durability under repeated directional changes. The wheel has a diameter of 200 mm and runs on a precision ball bearing, while its body is made from aluminium to balance strength and low weight. The tread is an elastic, non-marking tyre that is vulcanised to the wheel, offering good grip, shock absorption and protection for floor surfaces. The overall height of the castor is 240 mm, measured from the mounting plate to the lowest point of the wheel tread. The static load capacity is 900 kg, allowing the castor to support substantial stationary loads without deformation. The dynamic load capacity is 360 kg at 6 km/h and 450 kg at 4 km/h, so operators should note that higher loads are permissible at lower travel speeds.

200 mm
240 mm
450 kg
200 mm
240 mm
450 kg
Variants
Swivel castor 200 mm
Swivel castor 200 mm
Zeta
4680IFP200P63

The Zeta swivel castor features a medium rectangular plate fitting for secure mounting applications. The housing is constructed from steel sheet, very heavy grade material, incorporating two ball races, reinforced or stainless swivel bearing system for enhanced durability and smooth operation. The wheel assembly comprises an aluminium body fitted with an elastic tyre, non-marking, vulcanised tread material, supported by precision ball bearing for optimal performance. The wheel diameter measures 200 mm, with an overall height of 240 mm providing suitable clearance for various applications. Load capacity specifications include dynamic ratings of 500 kg at 4 km/h and 400 kg at 6 km/h operating speeds, whilst the static load capacity reaches 1000 kg. This castor is specifically designed for demanding applications including airport equipment, automotive OEM, production and platform trolleys, and transport equipment where reliability and performance are essential.

200 mm
240 mm
500 kg
200 mm
240 mm
500 kg
Variants
Fixed castor 200 mm
Fixed castor 200 mm
Zeta
4688IFP200P63

The Zeta fixed castor is a robust mobility solution engineered for demanding industrial applications, featuring a medium rectangular plate fitting that ensures secure and stable mounting to equipment and trolleys. The housing is constructed from very heavy steel sheet, providing exceptional durability and structural integrity for high-stress operational environments. The wheel assembly comprises a 200 mm diameter design with a precision ball bearing that delivers smooth, reliable rotation and extended service life, whilst the tread is manufactured from elastic tire material that is non-marking and vulcanized, ensuring compatibility with sensitive surfaces and preventing floor contamination. The overall height of the castor measures 240 mm, accommodating standard equipment configurations and platform requirements. Load capacity specifications indicate a static load rating of 900 kg, with dynamic load capacities of 360 kg at 6 km/h and 450 kg at 4 km/h, enabling flexible deployment across varying operational speeds and load conditions. The aluminium wheel body combines lightweight characteristics with corrosion resistance, optimising performance whilst reducing maintenance requirements. This castor is specifically designed for airport equipment, automotive original equipment manufacturer applications, production and platform trolleys, and general transport equipment, where reliability, load-bearing capability, and floor protection are critical operational requirements.

200 mm
240 mm
450 kg
200 mm
240 mm
450 kg